TM 5-3805-292-23
0009
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
LOCATION
ITEM TO
ITEM
MAN-
NOT FULLY MISSION
CHECK/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
WARN I N G
Hydraulic
Drive Motor
(Final Drive
Oil)
Contact with engine/hydraulic oil can damage skin.
Wear gloves when handling engine/hydraulic oil. If oil
contacts skin, wash it off immediately. Failure to follow
this warning may result in injury to personnel.
N OT E
This procedure is for the left final drive motor. Repeat
this procedure for the right final drive motor.
13
500 Hours
0.6
a. Park machine on level ground
with final drive in drain position (LO
5-3805-292-13).
b. Remove drain/fill plug and side
plug and drain oil.
c. Install side plug.
d. Park machine on level ground
with final drive in fill position.
e. Fill final drive with oil until oil just
begins to flow out of oil fill orifice.
f. Install drain/fill plug.
0009-12