TM 5-3805-292-23
0059
REMOVAL
00059
N OT E
Tag lines and hoses to aid in installation.
Cap lines, fittings, and hoses.
1. Disconnect hose (Figure 1, Item 7) from module (Figure 1, Item 8).
2. Remove clamp (Figure 1, Item 6) and hose (Figure 1, Item 5) from module (Figure 1, Item 8).
3. Disconnect line (Figure 1, Item 4) from module (Figure 1, Item 8).
WARN I N G
Use assistance to hold module in position. Failure to follow this warning may result in
injury to personnel.
4. Remove four bolts (Figure 1, Item 2), washers (Figure 1, Item 3), two brackets (Figure 1, Item 1), and clamp
(Figure 1, Item 9) from machine.
5. With assistance, remove two bolts (Figure 1, Item 10) and washers (Figure 1, Item 11) from machine.
Figure 1. Module.
0059