TM 5-3805-292-23
0059
INSTALLATION
00059
N OT E
Use assistance to hold module in position.
Remove caps from lines, fittings, and hoses,
Install lines and hoses as tagged during removal.
Module weighs 60 lb (27 kg).
1. With assistance, position module (Figure 4, Item 4) in machine.
2. Tilt module (Figure 4, Item 4) to access line (Figure 4, Item 1) and hose (Figure 4, Item 3).
3. Install hose (Figure 4, Item 3), clamp (Figure 4, Item 2) and line (Figure 4, Item 1) on module (Figure 4, Item 4).
4. Install seal (Figure 4, Item 6) on bottom of fan shroud (Figure 4, Item 5).
Figure 4. Hose and Clamp.
0059
N OT E
Use assistance to hold module in position.
Remove caps from lines, fittings, and hoses,
Install lines and hoses as tagged during removal.
5. With assistance, install two washers (Figure 5, Item 11) and bolts (Figure 5, Item 10) on machine.
6. Install two brackets (Figure 5, Item 1), four washers (Figure 5, Item 3), clamp (Figure 5, Item 9), and bolts (Fig-
ure 5, Item 2) on machine.
7. Install line (Figure 5, Item 4) on module (Figure 5, Item 8).
8. Install hose (Figure 5, Item 5) and clamp (Figure 5, Item 6) on module (Figure 5, Item 8).
9. Connect hose (Figure 5, Item 7) to module (Figure 5, Item 8).