TM 5-3805-292-23
0082
CLEANING AND INSPECTION
00082
Clean, inspect, and flush hydraulic system IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
INSTALLATION
00082
N OT E
Hydraulic hoses, lines, and fittings are all ge erally installed using the same method. This
n
procedure covers installation of one hydraulic hose, line, and fitting from the machine.
Route hoses and lines as noted during removal.
Install all hoses, lines, and fittings as tagged during removal.
Install additional components if removed.
1. Install fitting (Figure 3, Item 7) on machine and tighten nut (Figure 3, Item 6).
2. Install line (Figure 3, Item 2) on machine.
3. Install line (Figure 3, Item 2) on fitting (Figure 3, Item 7) and tighten nut (Figure 3, Item 8).
4. Install hose (Figure 3, Item 3) on machine.
5. Connect hose (Figure 3, Item 3) to line (Figure 3, Item 5) and tighten nut (Figure 3, Item 4).
6. Connect hose (Figure 3, Item 3) to line (Figure 3, Item 2) and tighten nut (Figure 3, Item 1).
0082-4
