TM 5-3805-292-23
0099
REMOVAL CONTINUED
3. Inside cab remove three bolts (Figure 2, Item 1) from plate (Figure 2, Item 2).
4. Remove sealing compound (Figure 2, Item 3) from plate (Figure 2, Item 2).
Figure 2. Heat Shield Plate (Cab Interior).
0099
5. Outside cab, remove two wiring harness clamp nuts (Figure 3, Item 6) and position harnesses aside.
6. Remove three nuts (Figure 3, Item 5) from plate (Figure 3, Item 4).
7. Remove and discard tiedown straps (Figure 3, Item 1).
N OT E
Position suitable container to catch fluid from heater hoses.
8. Disconnect two heater hoses (Figure 3, Item 2). Disconnect electrical connector (Figure 3, Item 3). Position
hoses and harness aside. Cap hoses.
