TM 5-3805-292-23
0099
INSTALLATION
00099
N OT E
Plate weighs 45 lb (20 kg).
1. Position fire extinguisher bracket (Figure 6, Item 3) on plate (Figure 6, Item 4) and install four bolts (Figure 6,
Item 1) and nuts (Figure 6, Item 2).
2. Position upper weapon rack (Figure 6, Item 7) on plate (Figure 6, Item 4) and install two bolts (Figure 6, Item 5)
and nuts (Figure 6, Item 6).
Figure 6. Heat Shield Plate and Brackets.
0099
3. With assistance, position plate (Figure 7, Item 4) and install three nuts (Figure 7, Item 5).
4. Install new tiedown straps (Figure 7, Item 1).
5. Remove plugs from hoses. Connect two heater hoses (Figure 7, Item 2). Connect electrical connector (Figure
7, Item 3).
6. Install two wiring harness clamp nuts (Figure 7, Item 6).