TM 5-3805-292-23
0167
REMOVAL
000167
Auger Drive
000167
1. Support drive housing on blocks of wood so drive housing is horizontal.
2. Disconnect two hoses (Figure 1, Item 1) from fittings (Figure 1, Item 2).
3. Remove two fittings (Figure 1, Item 2) from fittings (Figure 1, Item 4).
4. Remove two fittings (Figure 1, Item 4) and O-rings (Figure 1, Item 5) from auger drive (Figure 1, Item 3). Dis-
card O-rings.
Figure 1. Auger Drive Removal.
0167
5. Remove two retaining pins (Figure 2, Item 9), pivot pin (Figure 2, Item 10), and auger drive (Figure 2, Item 11)
from quick attach mounting bracket (Figure 2, Item 1).
END OF TASK