TM 5-3805-298-23-1
0036
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
036
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Does Not Crank or
Test Step 6. Test Lower Cab Wiring
Cranks Slowly - Continued
Harness for Voltage.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove left engine access panel
(WP 0350).
3. Remove transmission ECM cover
(WP 0266).
4. Disconnect connector C-C13
(WP 0012, Figure 25) from
transmission ECM J2 (WP 0266).
5. Turn battery disconnect and
ignition switch to the ON position
(TM 5-3805-298-10).
6. Have an assistant hold the ignition
switch in the start position
(TM 5-3805-298-10) while
performing the next step.
7. Using a digital multimeter
Voltage 18 to 26 V - Replace
(WP 0174), test for voltage
transmission ECM (WP 0266).
between connector C-C13
Proceed to Test Step 10.
(WP 0012, Figure 25) terminal 1
Voltage Less Than 18 V - Proceed to
and machine ground.
Test Step 7.
0036-22
