TM 5-3805-298-23-1
0036
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
036
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Does Not Crank or
Test Step 7. Test Lower Cab Wiring
Cranks Slowly - Continued
Harness for an Open.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Remove instrument cluster
for access to wiring harness
connectors (WP 0252).
3. Disconnect connector C-C61
(WP 0012, Figure 36) from ignition
switch (WP 0012, Figure 37).
4. Using a digital multimeter
Resistance 5.0 Ohms or Less -
(WP 0174), measure resistance
Proceed to step 5.
between connector C-C13
Resistance Greater Than 5.0 Ohms -
(WP 0012, Figure 25) terminal 1
Replace lower cab wiring harness
and C-C61 (WP 0012, Figure 36)
(WP 0291).
terminal 3.
Proceed to Test Step 10.
5. Using a digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C13
Proceed to Test Step 10.
(WP 0012, Figure 25) terminal 1
No Continuity - Replace ignition switch
and machine ground.
(WP 0254).
Connect all wiring harness connectors.
Install instrument cluster (WP 0252).
Install transmission ECM cover
(WP 0266).
Install left engine access panel
(WP 0350).
Proceed to Test Step 10.
0036-23