TM 5-3805-298-23-1
0036
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
036
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Engine Does Not Crank or
Test Step 8. Test for Voltage at
Cranks Slowly - Continued
Starter Motor.
1. Position starter relay fuse boot
(Figure 14, Item 4) and starter
relay magnetic switch boot
(Figure 14, Item 1) aside.
2. Inspect engine wiring harness
Engine Wiring Harness OK - Proceed
connections (Figure 14, Items 2
to Test Step 9.
and 5) at starter relay fuse
Engine Wiring Harness Damaged -
(Figure 14, Item 6) and starter
Replace engine wiring harness
relay magnetic switch (Figure 14,
(WP 0284).
Item 3) for damage and loose or
Proceed to Test Step 10.
corroded connections.
Engine Wiring Harness Loose or
Corroded - Clean and tighten engine
wiring harness connections.
Install left engine access panel
(WP 0350).
Proceed to Test Step 10.
Figure 14. Starter Relay Fuse and Starter Relay Magnetic Switch.
0036
Test Step 9. Test Engine Control
Wiring Harness for an Open.
1. Remove nut (Figure 15, Item 2),
washer (Figure 15, Item 3), and
engine wiring harness terminal
(Figure 15, Item 1) from starter
relay magnetic switch (Figure 15,
Item 4).