TM 5-3805-298-23-1
0071
Table 1. Transmission Does Not Operate in Any Gear - Continued.
071
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5. Visually inspect filter hoses of
Transmission Filter Hoses Are Not
Transmission Does Not
Leaking - Proceed to step 6.
transmission for Class III leaks
Operate in Any Gear -
(WP 0316). Check the ground for
Continued
Transmission Filter Hoses Are
signs of leakage.
Leaking - Tighten or replace
transmission filter hoses (WP 0316).
Proceed to Test Step 10.
6. Visually inspect transmission oil
Transmission Oil Cooler Hoses Are
cooler hoses for Class III leaks
Not Leaking - Drain and fill
(WP 0173). Check the ground for
transmission oil (WP 0312).
signs of leakage.
Proceed to Test Step 10.
Transmission Oil Cooler Hoses Are
Leaking - Tighten or replace
transmission oil cooler hoses
(WP 0173).
Proceed to Test Step 10.
Test Step 5. Test Transmission Oil
Pump.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Apply sealant on threads of
580 psi (4,000 kPa) gauge
(Figure 1, Item 1) and a 6V-3966
valved nipple (Figure 1, Item 3)
from pressure gauge kit.
3. Install adapter (Figure 1, Item 4)
on 580 psi (4,000 kPa) gauge
(Figure 1, Item 1).
4. Install 6V-3966 valved nipple
(Figure 1, Item 3) on adapter
(Figure 1, Item 4).
5. Connect hose 177-7861 (Figure 1,
Item 2), from pressure gauge kit, to
6V-3966 valved nipple (Figure 1,
Item 3).
0071-4
