TM 5-3805-298-23-1
0113
Table 1. 1404 Solenoid Valve 4 (Second Gear) Diagnostic Codes - Continued.
0113
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
Continuity Replace lower cab wiring
1404-6 Solenoid Valve 4
(WP 0174), test for continuity
harness (WP 0291).
(Second Gear) Current
between connector C-C12
Above Normal - Continued
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 49
No Continuity Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Install right engine access panel
(WP 0348).
5. Apply and hold service brake, start
Diagnostic Code 1404-6 Solenoid
engine, and shift transmission into
Valve 4 (Second Gear) Current
second gear forward
Above Normal Becomes Inactive
(TM 5-3805-298-10). Using MSD,
Troubleshooting complete.
check for active diagnostic codes
Diagnostic Code 1404-6 Solenoid
Valve 4 (Second Gear) Current
Above Normal Remains Active
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0113-9/(10 blank)
