TM 5-3805-298-23-1
0114
Table 1. 1405 Solenoid Valve 5 (Third Gear) Diagnostic Codes - Continued.
0114
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
1405-6 Solenoid Valve 5
Continuity Replace lower cab wiring
(WP 0174), test for continuity
(Third Gear) Current Above
harness (WP 0291).
between connector C-C12
Normal - Continued
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 51
No Continuity Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Install right engine access panel
(WP 0348).
5. Apply and hold service brake, start
Diagnostic Code 1405-6 Solenoid
engine, and shift transmission into
Valve 5 (Third Gear) Current Above
third gear forward
Normal Becomes Inactive
(TM 5-3805-298-10). Using MSD,
Troubleshooting complete.
check for active diagnostic codes
Diagnostic Code 1405-6 Solenoid
Valve 5 (Third Gear) Current Above
Normal Remains Active Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0114-9/(10 blank)