TM 5-3805-298-23-2
0177
REMOVAL CONTINUED
CAUTION
Cap all hydraulic openings along with component connections during removal to protect
against contamination. Failure to follow this caution may result in damage to equipment.
NOTE
Tag and mark all hoses and tubes to aid in installation.
Note routing of hoses and tubes for installation.
55. Loosen two tube nuts (Figure 30, Item 8) and remove hoses (Figure 30, Item 7) and O-rings (Figure 30, Item 9)
from bracket and tube assembly (Figure 30, Item 1). Discard O-ring.
56. Loosen two tube nuts (Figure 30, Item 11) and remove hoses (Figure 30, Item 12) and O-rings (Figure 30,
Item 10) from bracket and tube assembly (Figure 30, Item 1). Discard O-ring.
57. Remove bolt (Figure 30, Item 3), washer (Figure 30, Item 4) and P-clamp (Figure 30, Item 5) from bracket and
tube assembly (Figure 30, Item 1).
58. Remove two bolts (Figure 30, Item 6), washers (Figure 30, Item 2) and bracket and tube assembly (Figure 30,
Item 1) from machine.
Figure 30. Bracket and Tube Assembly.
0177