TM 5-3805-298-23-2
0186
ADJUSTMENT
000186
1. Remove drive belt (WP 0239).
2. Remove two bolts (Figure 4, Item 1) from crankshaft damper (Figure 4, Item 2).
3. Install crankshaft turning tool (Figure 4, Item 3) and two bolts (Figure 4, Item 1) on crankshaft damper
(Figure 4, Item 2).
Figure 4. Crankshaft Turning Tool.
0186
NOTE
Firing order is 1-5-3-6-2-4. No. 1 cylinder is at front of engine.
Cylinder 1 contains valve 1 and valve 2. Cylinder 2 contains valve 3 and valve 4.
Cylinder 3 contains valve 5 and valve 6. Cylinder 4 contains valve 7 and valve 8.
Cylinder 5 contains valve 9 and valve 10. Cylinder 6 contains valve 11 and valve 12.
Odd numbered valves are inlet valves, even numbered valves are exhaust valves.
Refer to Table 1, Valve Lash Sequence, for proper adjustment order.
