TM 5-3805-298-23-2
0192
ENGINE OIL COOLER REMOVAL CONTINUED
NOTE
Do not remove engine oil cooler base unless it is damaged or leaking.
13. Remove bolt (Figure 7, Item 3), engine oil cooler base (Figure 7, Item 1), and gasket (Figure 7, Item 2) from
machine. Discard gasket.
Figure 7. Engine Oil Cooler Base.
0192
END OF TASK
CLEANING AND INSPECTION
000192
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
ENGINE OIL COOLER INSTALLATION
000192
1. If removed, install new gasket (Figure 7, Item 2), engine oil cooler base (Figure 7, Item 1), and bolt
(Figure 7, Item 3) on machine. Tighten bolt to 192 lb-in (22 Nm).