TM 5-3805-298-23-2
0196
REMOVAL
000196
NOTE
Cap or plug hoses, tube, and open ports during removal.
Tag and mark hoses and tube to aid installation.
Note hose and tube routing to aid installation.
Use container to catch any fluid that may drain from system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
1. Loosen tube nut (Figure 1, Item 5) and remove hose (Figure 1, Item 6) and O-ring (Figure 1, Item 4) from
secondary fuel filter base (Figure 1, Item 1). Position hose aside. Discard O-ring.
2. Loosen tube nut (Figure 1, Item 7) from tube (Figure 1, Item 8) and secondary fuel filter base (Figure 1, Item 1).
3. Loosen tube nut (Figure 1, Item 9) from elbow fitting (Figure 1, Item 10) and allow tube (Figure 1, Item 8) to
swing down from secondary fuel filter base (Figure 1, Item 1).
4. Disconnect hose (Figure 1, Item 3) from secondary fuel filter base (Figure 1, Item 1). Position hose aside.
5. Remove two bolts (Figure 1, Item 2) and secondary fuel filter base (Figure 1, Item 1) from machine.
Figure 1. Secondary Fuel Filter Base.
0196
