TM 5-3805-298-23-2
0224
ETHER VALVE AND BRACKET REMOVAL CONTINUED
4. Loosen tube nut (Figure 4, Item 17) and remove line (Figure 4, Item 16) from ether valve (Figure 4, Item 12).
5. Remove tiedown strap (Figure 4, Item 14) from ether valve connector (Figure 4, Item 15). Discard tiedown
strap.
NOTE
Tag electrical connectors and wiring harness to aid installation.
6. Disconnect rear frame harness connector (Figure 4, Item 13) from ether valve connector (Figure 4, Item 15).
7. Remove cap and tether (Figure 4, Item 2) from housing (Figure 4, Item 18).
8. Remove bolt (Figure 4, Item 19) and housing (Figure 4, Item 18) from bracket (Figure 4, Item 6).
9. Remove two bolts (Figure 4, Item 1), cap and tether (Figure 4, Item 2), bracket (Figure 4, Item 6) and ether
valve (Figure 4, Item 12) from machine.
10. Remove two nuts (Figure 4, Item 10), lockwashers (Figure 4, Item 9), bolts (Figure 4, Item 7), washers
(Figure 4, Item 8) and bracket (Figure 4, Item 11) from machine. Discard lockwashers.
11. Remove four bolts (Figure 4, Item 3), washers (Figure 4, Item 4), and bracket (Figure 4, Item 5) from machine.
Figure 4. Valve and Bracket.
0224
END OF TASK