TM 5-3805-298-23-4
0398
LEFT BATTERIES REMOVAL
000398
WARNING
Make sure battery disconnect switch is in OFF position before replacing batteries. Failure
to follow this warning may result in injury or death to personnel or damage to equipment.
NOTE
Tag and mark electrical connectors and note cable routing to aid installation.
1. Position positive cable boot (Figure 5, Item 4) aside.
2. Remove nut (Figure 5, Item 1), washer (Figure 5, Item 3), and positive NATO slave cable (Figure 5, Item 11)
from stud (Figure 5, Item 2).
3. Remove tiedown strap (Figure 5, Item 9) from saddle (Figure 5, Item 10) and positive NATO slave cable
(Figure 5, Item 11). Position positive NATO slave cable aside. Discard tiedown strap.
NOTE
Note position of washers, spacers, and cable to aid installation.
4. Remove bolt (Figure 5, Item 7), two washers (Figure 5, Item 5), spacer (Figure 5, Item 6) and ground NATO
slave cable (Figure 5, Item 8) from battery box (Figure 5, Item 12).
Figure 5. NATO Slave Cables.
0398
