TM 5-3805-298-23-4
0398
LEFT BATTERIES INSTALLATION
000398
WARNING
Make sure battery disconnect switch is in OFF position before replacing batteries. Failure
to follow this warning may result in injury or death to personnel or damage to equipment.
NOTE
Route cables and install electrical connections as noted during removal.
1. Install three batteries (Figure 9, Item 5) on battery box (Figure 9, Item 9).
2. Install four rods (Figure 9, Item 8) on battery box (Figure 9, Item 9).
3. Install angle bracket (Figure 9, Item 10), four washers (Figure 9, Item 7), and new locknuts (Figure 9, Item 6)
on three batteries (Figure 9, Item 5).
4. Install cross connect battery cable (Figure 9, Item 4), three clamps (Figure 9, Item 3), and nuts
(Figure 9, Item 1) on three batteries (Figure 9, Item 5).
5. Position three cable boots (Figure 9, Item 2) on three clamps (Figure 9, Item 3).
Figure 9. Left Batteries.
0398