TM 5-2420-231-23-1
0013
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
013
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
14. Using a digital multimeter, mea-
Engine Does Not Crank or
Resistance 5.0 Ohms or Less -
sure resistance between front
Proceed to step 15.
Cranks Slowly - Continued
main chassis wiring harness con-
Resistance Greater Than 5.0 Ohms -
nector (WP 0007, Figure 6) termi-
Replace main chassis wiring harness
nal M7 and rear main chassis
(WP 0154).
wiring harness connector (WP
Proceed to Test Step 7.
0007, Figure 25) terminal M7.
Resistance should be 5.0 ohms or
less.
15. Using a digital multimeter, test for
Continuity - Replace main chassis
continuity between rear main chas-
wiring harness (WP 0154).
sis wiring harness connector
Install relays and all connectors.
(WP 0007, Figure 27) terminal M7
Proceed to Test Step 7.
and machine ground. There should
No Continuity - Remove bezel from
be no continuity.
rear instrument panel right-side cover
(WP 0172).
Proceed to step 16.
16. Disconnect ignition switch wiring
harness connector (Figure 14,
Item 2) from ignition switch
(Figure 14, Item 1).
Figure 14. Ignition Switch.
0013