TM 5-2420-231-23-1
0013
Table 1. Engine Does Not Crank or Cranks Slowly - Continued.
013
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2. Remove starter relay (Figure 11,
Engine Does Not Crank or
Item 2) from front console wiring
Cranks Slowly - Continued
harness connector (Figure 11,
Item 1).
3. Using a digital multimeter, mea-
Voltage 10 to 14 Volts - Turn ignition
sure voltage between starter relay
switch to the off position (TM 5-2420-
wiring harness connector (WP
231-10) and disconnect batteries (WP
0007, Figure 23) terminal 85 and
0157).
machine ground with ignition
Proceed to Test Step 6.
switch in the start position (TM 5-
Voltage Less Than 10 Volts - Proceed
2420-231-10). Voltage should be
to step 4.
10 to 14 volts.
4. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10).
5. Remove neutral relay (Figure 11,
Item 3) from front console wiring
harness connector (Figure 11,
Item 4).
Figure 11. Neutral Relay and Starter Relay.
0013
6. Disconnect batteries (WP 0157).
