TM 5-2420-231-23-2
0115
INSTALLATION
0115
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
1. Apply a bead of silicone sealant (Figure 2, Item 6) on air intake cover (Figure 2, Item 7) mounting surface.
NOTE
Apply sealant to threads of bolts.
2. Install air intake cover (Figure 2, Item 7) and four bolts (Figure 2, Item 5) on machine.
3. Install two fuel line mounting tabs (Figure 2, Item 2) and bolts (Figure 2, Item 1) on air intake cover
(Figure 2, Item 7).
4. Install lifting eye (Figure 2, Item 4) and two bolts (Figure 2, Item 3) on engine.
Figure 2. Intake Manifold Cover.
0115
END OF TASK
FOLLOW-ON TASKS
0115
Install intake manifold and heater grid (WP 0114).
END OF TASK
END OF WORK PACKAGE