2
TM 5-2420-231-23-2
FIELD MAINTENANCE
-
AIR INTAKE COVER REPLACEMENT
0115
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
References - Continued
Tools and Special Tools
Tool Kit, General Mechanic's
WP 0374 (Group Number 0118)
0
0
(WP 0376, Item 117)
Equipment Conditions
Materials/Parts
Intake manifold and heater grid removed
0
Rag, Wiping (WP 0375, Item 25)
0
Sealant, Silicone (WP 0375, Item 28)
Estimated Time to Complete
0
References
2.5 hr
0
WP 0369
0
REMOVAL
0115
1. Remove two bolts (Figure 1, Item 3) and lifting eye (Figure 1, Item 4) from engine. Position lifting eye aside.
2. Remove two bolts (Figure 1, Item 1) and fuel line mounting tabs (Figure 1, Item 2) from engine air intake cover
(Figure 1, Item 6).
3. Remove four bolts (Figure 1, Item 5) and air intake cover (Figure 1, Item 6) from engine.
Figure 1. Intake Manifold Cover.
0115
END OF TASK
CLEANING AND INSPECTION
0115
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK