TM 5-2420-231-23-2
0161
REMOVAL CONTINUED
NOTE
Mounting bolts, lockwashers, and spacers are held in place by O-rings.
3. Loosen three mounting bolts (Figure 2, Item 3) and position mounting plate (Figure 2, Item 2) away from bulk-
head (Figure 2, Item 1).
4. Remove three O-rings (Figure 2, Item 6), spacers (Figure 2, Item 5), lockwashers (Figure 2, Item 4), bolts
(Figure 2, Item 3), and one clamp (Figure 2, Item 7) from mounting plate (Figure 2, Item 2). Discard O-rings
and lockwashers.
Figure 2. Mounting Bolts.
0161
NOTE
Tag and mark wires to aid in installation.
5. Disconnect wiring harness connector (Figure 3, Item 2) from grid heater relay (Figure 3, Item 1).
6. Disconnect wiring harness connector (Figure 3, Item 3) from grid heater controller (Figure 3, Item 4).
Figure 3. Wiring Harness Connections.
0161
