TM 5-2420-231-23-2
0204
INSTALLATION CONTINUED
2. Install vent fitting (Figure 8, Item 3) on front axle (Figure 8, Item 2).
NOTE
Install fitting in position and orientation noted during removal.
3. Install new O-ring (Figure 8, Item 5) and fitting (Figure 8, Item 1), and tighten nut (Figure 8, Item 6) on front axle
(Figure 8, Item 2).
4. Connect lubrication hose (Figure 8, Item 4) to fitting (Figure 8, Item 1).
Figure 8. Lubrication Hose and Fitting.
0204
5. With assistance, raise front axle from trestles with suitable lifting device and position front axle under machine.