TM 5-2420-231-23-2
0221
REMOVAL
0221
WARNING
Allow hydraulic system to cool before performing procedure. Hot hydraulic fluid can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
1. Disconnect wiring harness connector (Figure 1, Item 2) from rear drive axle oil temperature sending unit
(Figure 1, Item 4).
2. Remove rear drive axle oil temperature sending unit (Figure 1, Item 4) from rear axle (Figure 1, Item 1).
3. Remove O-ring (Figure 1, Item 3) from rear drive axle oil temperature sending unit (Figure 1, Item 4).
Discard O-ring.
Figure 1. Rear Drive Axle Oil Temperature Sending Unit.
0221
END OF TASK
CLEANING AND INSPECTION
0221
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
