TM 5-2420-231-23-3
0243
REMOVAL
0243
1. Remove two bolts (Figure 1, Item 14), clamp (Figure 1, Item 1), two spacers (Figure 1, Item 2), locknuts
(Figure 1, Item 9), and clamps (Figure 1, Item 8) from machine. Discard locknuts.
2. Remove two bolts (Figure 1, Item 13), clamp (Figure 1, Item 3), two spacers (Figure 1, Item 12), locknuts
(Figure 1, Item 10), and clamps (Figure 1, Item 11) from machine. Discard locknuts.
3. Disconnect backhoe boom cylinder tube (Figure 1, Item 4) from hydraulic hose (Figure 1, Item 6).
4. Disconnect backhoe boom cylinder tube (Figure 1, Item 4) from hydraulic hose (Figure 1, Item 16).
5. Remove backhoe boom cylinder tube (Figure 1, Item 4) from machine.
6. Disconnect backhoe boom cylinder tube (Figure 1, Item 5) from hydraulic hose (Figure 1, Item 7).
7. Disconnect backhoe boom cylinder tube (Figure 1, Item 5) from hydraulic hose (Figure 1, Item 15).
8. Remove backhoe boom cylinder tube (Figure 1, Item 5) from machine.
Figure 1. Backhoe Boom Cylinder Tubes.
0243
END OF TASK
CLEANING AND INSPECTION
0243
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK