TM 5-2420-231-23-3
0248
INSTALLATION
0248
WARNING
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
NOTE
Remove plugs and caps from hoses and fittings.
Install lines as tagged and marked during removal.
1. Connect backhoe bucket hydraulic hose (Figure 1, Item 4) to backhoe bucket cylinder tube (Figure 1, Item 3).
2. Install new O-ring (Figure 1, Item 9) and connect backhoe bucket hydraulic hose (Figure 1, Item 1) to backhoe
bucket cylinder (Figure 1, Item 2).
3. Install bolt (Figure 1, Item 5), two clamps (Figure 1, Item 6), washer (Figure 1, Item 8), and new locknut
(Figure 1, Item 7) on backhoe bucket hydraulic hoses (Figure 1, Items 1 and 4).
END OF TASK
FOLLOW-ON TASKS
0248
Install backhoe bucket cylinder (WP 0276).
END OF TASK
END OF WORK PACKAGE
0248-3/(4 blank)
