TM 5-2420-231-23-3
0276
REMOVAL CONTINUED
9. Remove locknut (Figure 4, Item 9), washer (Figure 4, Item 8), bolt (Figure 4, Item 11), and two clamps
(Figure 4, Item 10) from hose (Figure 4, Item 1) and tube assembly (Figure 4, Item 7). Discard locknut.
10. Remove clamp (Figure 4, Item 4) from backhoe bucket cylinder (Figure 4, Item 3).
NOTE
Note position of hose, tube assembly, and fitting to aid in installation.
11. Disconnect hose (Figure 4, Item 1) and remove O-ring (Figure 4, Item 2) from backhoe bucket cylinder
(Figure 4, Item 3). Discard O-ring.
12. Disconnect tube assembly (Figure 4, Item 7) from backhoe bucket cylinder (Figure 4, Item 3).
13. Remove fitting (Figure 4, Item 6) and O-ring (Figure 4, Item 5) from backhoe bucket cylinder (Figure 4, Item 3).
Discard O-ring.
Figure 4. Backhoe Bucket Cylinder.
0276
END OF TASK
CLEANING AND INSPECTION
0276
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK