TM 5-2420-231-23-3
0285
REMOVAL CONTINUED
NOTE
Note position of fittings to aid in installation.
7. Disconnect hose (Figure 3, Item 1) from elbow fitting (Figure 3, Item 2).
8. Disconnect hose (Figure 3, Item 4) from elbow fitting (Figure 3, Item 3).
9. Disconnect hose (Figure 3, Item 4) from tee fitting (Figure 3, Item 5). Remove hose from machine.
10. Disconnect hose (Figure 3, Item 1) from elbow fitting (Figure 3, Item 6). Remove hose from machine.
Figure 3. Tool Quick-Coupler Cylinder Hoses.
0285
END OF TASK
CLEANING AND INSPECTION
0285
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0285
NOTE
Install lines as tagged and marked during removal.
Remove plugs and caps from hoses and fittings.
1. Position hose (Figure 3, Item 1) on machine.
2. Connect hose (Figure 3, Item 1) to elbow fitting (Figure 3, Item 6).
3. Position hose (Figure 3, Item 4) on machine.
4. Connect hose (Figure 3, Item 4) to tee fitting (Figure 3, Item 5).
5. Connect hose (Figure 3, Item 4) to elbow fitting (Figure 3, Item 3).
6. Connect hose (Figure 3, Item 1) to elbow fitting (Figure 3, Item 2).