32
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
BACKHOE CONTROL TOWER ASSEMBLY REPAIR
02
86
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic's
Lockwasher (10)
0
0
(WP 0376, Item 117)
References
Pan, Drain, 5 gal. Capacity (WP 0376, Item 54)
0
Pliers, Retaining Ring, Fixed Tip, Convertible,
0
0
90/.090" Tips, 8-3/4" (WP 0376, Item 61)
0
WP 0374 (Group Number 0715, 0809, and
Sling, Nylon, 8 ft x 1 in. (WP 0376, Item 82)
0
0
0811)
Lifting device (125-lb capacity)
0
Personnel Required
Materials/Parts
Two
Cap Set, Protective, Dust and Moisture
0
0
(WP 0375, Item 4)
Equipment Conditions
Rag, Wiping (WP 0375, Item 25)
Cab assembly removed (WP 0327)
0
0
Tag, Marker (WP 0375, Item 33)
0
Estimated Time to Complete
Tiedown Strap (WP 0375, Item 35)
0
24.0 hr
Cotter Pin (2)
0
0
Locknut (10)
0
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
CAUTION
Plug and cap all hoses and fittings to prevent contamination. Failure to follow this caution
may result in damage to the machine.
NOTE
Tag and mark lines to aid in installation.
0286-1