TM 5-2420-231-23-3
0286
REMOVAL
0286
NOTE
Note location and quantity of tiedown straps to aid in installation.
Note routing of lines and wires to aid in installation.
1. Remove tiedown strap (Figure 1, Item 9) from right backhoe tower (Figure 1, Item 8). Discard tiedown strap.
2. Remove two bolts (Figure 1, Item 3) from joystick plate (Figure 1, Item 2).
3. Remove four bolts (Figure 1, Item 5) and plate (Figure 1, Item 1) from joystick bracket (Figure 1, Item 4).
4. With assistance, remove locknut (Figure 1, Item 7), two washers (Figure 1, Item 6), spacer (Figure 1, Item 10),
bolt (Figure 1, Item 11), and joystick bracket (Figure 1, Item 4) from right backhoe control tower (Figure 1,
Item 8). Discard locknut.
5. Lay joystick plate (Figure 1, Item 2) aside.
Figure 1. Right Tower.
0286
NOTE
Note adjustment on cable to aid in installation.
6. Remove locknut (Figure 2, Item 4) and bolt (Figure 2, Item 3) from lever (Figure 2, Item 5), and disconnect
cable end (Figure 2, Item 7) from lever. Discard locknut.
7. Loosen jamnut (Figure 2, Items 9), jamnut (Figure 2, Item 2), and remove cable (Figure 2, Item 8) from mount
(Figure 2, Item 1).
