2
TM 5-2420-231-23-3
FIELD MAINTENANCE
-
BACKHOE/LOADER BUCKET SURFACE RIPPING TEETH REPLACEMENT
02
98
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Tools and Special Tools
References
Tool Kit, General Mechanic's
0
0
(WP 0376, Item 117)
WP 0374 (Group Number 0818)
0
Punch, Drift, 1/4" Dia Pt, 10-1/8" OAL
0
Equipment Conditions
(WP 0376, Item 70)
Machine parked (TM 5-2420-231-10)
0
Materials/Parts
Estimated Time to Complete
Rag, Wiping (WP 0375, Item 25)
0
0.5 hr
Spring pin
0
0
REMOVAL
0298
NOTE
Spring pin must be removed with center punch. Do not use brass drift.
1. With hammer and punch, remove spring pin (Figure 1, Item 3) from bucket (Figure 1, Item 2). Discard spring
pin.
2. Remove surface ripping tooth (Figure 1, Item 1) from bucket (Figure 1, Item 2).
Figure 1. Surface Ripping Tooth and Spring Pin.
0298
END OF TASK
CLEANING AND INSPECTION
0298
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK