TM 5-3805-255-14
0016
Table 8. Brake System Troubleshooting Procedures for the H100C Loader - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Check for grease on brake lining.
Reline brakes (WP 0059). If problem
6. Brakes Grab When
still exists, go to step 2.
Applied.
2. Check for brake drum out of
Service or replace drum (WP 0059). If
round.
problem still exists, go to step 3.
3. Check for defective brake treadle
Clean, lubricate, or repair treadle
valve.
valves (WP 0061). If problem still
exists, notify Sustainment
Maintenance.
1. Check brake adjustment.
Adjust brake linings (WP 0059). If
7. Brakes Pull When
problem still exists, go to step 2.
Applied.
2. Check for low fluid level in power
Add correct amount and type of fluid
clusters.
(WP 0013). If problem still exists, go
to step 3.
3. Check brake linings.
Replace brake linings (WP 0059). If
problem still exists, go to step 4.
4. Check for defective wheel
Repair or replace wheel cylinder
cylinders.
(WP 0059). If problem still exists, go
to step 5.
5. Check for broken brake return
Replace spring (WP 0059). If problem
spring.
still exists, go to step 6.
6. Check for defective power cluster. Repair or replace power cluster
(WP 0060). If problem still exists, go
to step 7.
7. Check for brake drum out of
Service or replace drum (WP 0059). If
round.
problem still exists, notify Sustainment
Maintenance.
1. Check for defective air pressure
Replace gauge (WP 0084). If problem
8. Air Pressure Will Not
gauge.
still exists, go to step 2.
Rise to Normal Reading.
2. Check for excessive leakage in air
Inspect for leaks and repair or replace
system.
components as necessary. If problem
still exists, go to step 3.
3. Check for open air reservoir drain. Close air reservoir drain. If problem
still exists, go to step 4.
4. Check for improper governor
Adjust governor (WP 0032). If
adjustment.
problem still exists, go to step 5.
5. Check for defective compressor.
Repair or replace compressor
still exists, notify Sustainment
Maintenance.
