TM 5-3805-255-14
0016
Table 14. Hydraulic Steering Control Valve Troubleshooting Procedures for the H100C Loader.
016
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Check hydraulic oil level.
Add correct amount and type of fluid
1. Hard Steering When
(WP 0018). If problem still exists, go
Turning Slowly.
to step 2.
2. Check for restrictions in lines.
Clean, repair, or replace lines. If
problem still exists, go to step 3.
3. Check for leaking steering control
Replace control valve (WP 0072). If
valve.
problem still exists, notify Sustainment
Maintenance.
Check for loose control valve.
Tighten control valve (WP 0072). If
2. No Effort Required to
problem still exists, notify Sustainment
Turn.
Maintenance.
Check hydraulic oil level.
Add correct amount and type of oil
3. Momentary Increase in
(WP 0018). If problem still exists,
Effort Required When
notify Sustainment Maintenance.
Turning Wheel Quickly.
Check for foaming oil.
Drain and add correct amount and
4. Excessive Wheel Kick-
type of fluid (WP 0018). If problem still
back or Loose Steering.
exists, notify Sustainment
Maintenance.
END OF WORK PACKAGE
0016-19/(20 blank)
