TM 5-3805-255-14
0016
Table 6. Transfer Drive Troubleshooting Procedures for the H100C Loader.
016
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Check for low lubricant level or
Fill to FULL mark on dipstick
1. Noise (Transfer Drive).
incorrect lubricant.
(WP 0013). If problem still exists, go
to step 2.
2. Check for scored or damaged
Replace bearings (WP 0050). If
problem still exists, notify Sustainment
Maintenance.
1. Check for high lubricant level.
Drain and correct level (WP 0018). If
2. Loss of Lubricant
problem still exists, go to step 2.
(Transfer Drive).
2. Check for excessively foaming
Drain and fill with correct type of
lubricant.
lubricant (WP 0018). If problem still
exists, go to step 3.
3. Check for worn or broken seals.
Replace seals (WP 0050). If problem
still exists, notify Sustainment
Maintenance.
