6
TM 5-3805-255-14
FIELD MAINTENANCE
-
STEERING CONTROL VALVE REPLACEMENT
0072
Removal, Cleaning and Inspection, Installation, System Pressure Adjustment
INITIAL SETUP
References
Tools and Special Tools
0
0
Tool Kit, General Mechanic's, Automotive (WP
0
0128, Item 20)
0
0
Gauge, High Pressure (5,000 psi)
0
Equipment Condition
0
Materials/Parts
Machine parked on level ground (WP 0005)
0
0
Cap Set, Protective Dust and Moisture Seal
Parking brake applied (WP 0005)
0
(WP 0130, Item 3)
Engine OFF (WP 0005)
0
0
Oil, Lubricating, OE/HDO-40 (WP 0130, Item
Battery disconnect switch in OFF position (WP
24)
0
0
Rag, Wiping (WP 0130, Item 28)
Safety bar installed (WP 0005)
0
0
Tag, Marker (WP 0130, Item 37)
Body access panels removed (WP 0005)
0
0
O-Ring (4)
Hydraulic system drained (WP 0016)
0
0
Wheels chocked
Personnel
0
0
Two
0
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut
down and hydraulic system pressure has been relieved.
Escaping hydraulic fluid under pressure can penetrate the skin, causing injury to
personnel.
When disposing of hydraulic fluid, consult your unit/local hazardous waste disposal center
or safety office for local regulatory guidance.
Lubricating/hydraulic oils can be very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury to personnel.
NOTE
Tag and identify all hydraulic lines for ease of installation and to protect and identify for
assembly. Cap all hydraulic lines to prevent contamination and leaks.
0072-1
