TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
SERVICE
CAPABLE IF:
ITEM NO. INTERVAL
PROCEDURE
g. Remove oil filter plug and fill
Monthly
Engine Oil and
16
Filter Change
crankcase with fresh oil. Refer to
(Cont.)
Table 6, Lubricants, in this work
package for grade and quantity of fluid
required. Install filter plug.
Figure 7. Crankcase Drain Plug.
0018
h. Operate engine at low idle for 5 to
10 minutes (WP 0005). Do not operate
under load until normal oil pressure
and temperature are reached. During
warm-up, check filters and crankcase
drain plug for leakage.
0018-15