TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
SERVICE
CAPABLE IF:
ITEM NO. INTERVAL
PROCEDURE
Monthly
Engine Oil and
16
Filter Change
(Cont.)
Figure 9. Crankcase Oil Filler Cap and Level Gauge.
0018
Semiannually Transmission Oil
17
WARNING
Change
When servicing this equipment, performing maintenance, or
disposing of materials such as engine/hydraulic oils, coolant,
and fuel, consult your unit/local hazardous waste disposal cen-
ter or safety office for local regulatory guidance.
Engine/hydraulic oils, coolant, and fuel can be very slippery.
Immediately wipe up any spills.
Transmission and oil may be hot. Use gloves.
Failure to follow these warnings may result in injury to
personnel.
a. After reaching operating
Class III transmission oil leak
is evident.
temperature, park loader on level
ground. Lower bucket to ground, apply
parking brake, and shut engine down
b. Install safety bar (WP 0005).
0018-17
