TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
Semiannually Transmission Oil c. Place container under transmission
17
Change
to catch oil.
(Cont.)
d. Remove drain plug from
transmission immediately after
operation while lubricant is still warm.
e. Unscrew transmission oil level
gauge and remove. This will vent case
and allow oil to drain faster.
f. Open vent valve on top right side of
transmission and torque converter oil
cooler. Cooler is mounted to rear of
radiator.
g. After lubricant has drained, service
transmission filter element. Refer to
"Transmission Oil Filter Change" in
this work package.
h. Install transmission drain plug.
Close oil cooler vent valve.
Figure 10. Transmission Sump Strainer and Drain Plug.
0018
0018-18
