TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
Periodic
Safety Filter
NOTE
19
Element
Replace the safety filter element with every third change of the
Replacement
outer element or when plugged as shown by the service
indicator.
a. Remove wing nut (and clamp if
equipped) and remove cover.
b. Remove wing bolt, seal, and
primary element.
NOTE
Be careful not to dislodge dust from the dirty element onto the
safety element.
c. Check condition of seal. If seal is
damaged or missing, replace.
Figure 14. Air Filter.
0018
0018-25
