TM 5-3805-255-14
0033
REMOVAL CONTINUED
Hand Throttle
00033
1. Remove cable clamp (Figure 4, Item 5) from cable (Figure 4, Item 3).
2. Remove cotter pin (Figure 4, Item 13), from cable fitting (Figure 4, Item 4). Discard cotter pin.
3. Disconnect cable fitting (Figure 4, Item 4) and lever (Figure 4, Item 9) from cable (Figure 4, Item 3).
4. Remove bolt (Figure 4, Item 8), nut (Figure 4, Item 12), lockwasher (Figure 4, Item 7), and two washers (Figure
4, Items 6 and 11), from lever (Figure 4, Item 9). Discard lockwasher.
5. Remove lever (Figure 4, Item 9) and sleeve (Figure 4, Item 10) from hinge (Figure 4, Item 14).
6. Remove nut (Figure 4, Item 1) and lockwasher (Figure 4, Item 2) from cable (Figure 4, Item 3) and cable from
bracket on dash. Discard lockwasher.
Figure 4. Hand Throttle.
0033
END OF TASK
0033-4