TM 5-3805-255-14
0033
CLEANING AND INSPECTION
00033
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Check cables for smooth operation. If cables bind or drag, replace cables.
END OF TASK
INSTALLATION
00033
Hand Throttle
00033
1. Install cable (Figure 4, Item 3), new lockwasher (Figure 4, Item 2), and nut (Figure 4, Item 1) on bracket.
2. Install sleeve (Figure 4, Item 10), lever (Figure 4, Item 9), new lockwasher (Figure 4, Item 7), two washers
(Figure 4, Items 6 and 11), bolt (Figure 4, Item 8), and nut (Figure 4, Item 12) on hinge (Figure 4, Item 14).
3. Install cable fitting (Figure 4, Item 4) on cable (Figure 4, Item 3).
4. Install cable clamp (Figure 4, Item 5) on cable (Figure 4, Item 3).
5. Install cable fitting (Figure 4, Item 4) on lever (Figure 4, Item 9) and new cotter pin (Figure 4, Item 13) on cable
fitting (Figure 4, Item 4).
0033-5
