TM 5-3805-255-14
0045
INSTALLATION
00045
6VDC Batteries
00045
1. Install two batteries (Figure 2, Item 17) on loader.
2. Install two angle bolts (Figure 2, Item 5), battery hold-downs (Figure 2, Item 4), new lockwashers (Figure 2,
Item 3), washers (Figure 2, Item 2), and nuts (Figure 2, Item 1) on batteries (Figure 2, Item 17).
3. Install two new cotter pins (Figure 2, Item 6) on angle bolts (Figure 2, Item 5).
NOTE
Connect battery cables as noted during removal.
4. Install intermediate cable (Figure 2, Item 12) on battery terminals. Install two bolts (Figure 2, Items 19 and 20)
and nuts (Figure 2, Items 18 and 11) on cable ends.
5. Install cable end (Figure 2, Item 16), bolt (Figure 2, Item 15), nut (Figure 2, Item 14), and two negative cables
(Figure 2, Item 13) on negative battery terminal.
6. Install cable end (Figure 2, Item 8), bolt (Figure 2, Item 10), nut (Figure 2, Item 9), and two positive cables
(Figure 2, Item 7) on positive battery terminal.
7. Close battery cover.
8. Repeat steps 1 through 7 for batteries on opposite side of loader.
0045-5
