TM 5-3805-255-14
0046
REMOVAL
00046
1. Remove cotter pin (Figure 1, Item 41), clevis pin (Figure 1, Item 45), and two control cables (Figure 1, Item 6)
from levers (Figure 1, Items 3 and 4). Discard cotter pin.
2. Remove two cable ends (Figure 1, Items 42 and 46) and nuts (Figure 1, Items 40 and 44) from control cables
(Figure 1, Item 6).
3. Remove two nuts (Figure 1, Item 43) and lockwashers (Figure 1, Item 38) from control cables (Figure 1, Item
6). Discard lockwashers.
4. Remove two control cables (Figure 1, Item 6) from control housing (Figure 1, Item 39).
5. Remove two nuts (Figure 1, Item 43) and lockwashers (Figure 1, Item 38) from control cables (Figure 1,
Item 6). Discard lockwashers.
6. Remove two control cables (Figure 1, Item 6) from floorboard (Figure 1, Item 37).
7. Remove cotter pin (Figure 1, Item 21) from clevis pin (Figure 1, Item 14) at transmission bellcrank (Figure 1,
Item 26). Discard cotter pin.
8. Remove clevis pin (Figure 1, Item 14) from cable end (Figure 1, Item 15).
9. Remove cable end (Figure 1, Item 15) and nut (Figure 1, Item 20) from control cable (Figure 1, Item 6).
10. Remove nut (Figure 1, Item 17) and lockwasher (Figure 1, Item 19) from control cable (Figure 1, Item 6) and
remove control cable from mounting bracket (Figure 1, Item 16). Discard lockwasher.
11. Remove two nuts (Figure 1, Item 25), lockwashers (Figure 1, Item 24), bolts (Figure 1, Item 22), and P-clamps
(Figure 1, Item 23) from control cables (Figure 1, Item 6). Discard lockwashers.
12. Remove nut (Figure 1, Item 17) and lockwasher (Figure 1, Item 19) from control cable (Figure 1, Item 6).
Discard lockwasher.
13. Remove control cable (Figure 1, Item 6) from loader.
14. Remove nut (Figure 1, Item 13), lockwasher (Figure 1, Item 12), and ball joint (Figure 1, Item 10) from
bellcrank (Figure 1, Item 11). Discard lockwasher.
15. Remove ball joint (Figure 1, Item 10) and nut (Figure 1, Item 9) from control cable (Figure 1, Item 6).
16. Remove locknut (Figure 1, Item 7) and lockwasher (Figure 1, Item 18) from control cable (Figure 1, Item 6).
Discard lockwasher and locknut.
17. Remove control cable (Figure 1, Item 6) from support bracket (Figure 1, Item 8).
18. Remove locknut (Figure 1, Item 7) and lockwasher (Figure 1, Item 18) from control cable (Figure 1, Item 6).
Discard lockwasher and locknut.
0046-2
