TM 5-3805-255-14
0060
DISASSEMBLY CONTINUED
14. Separate check valve and seat (Figure 11, Item 1) and spring (Figure 11, Item 2) from valve retainer (Figure 11,
Item 3).
Figure 11. Check Valve.
060
END OF TASK
CLEANING AND INSPECTION
00060
1. Clean and inspect all components IAW General Maintenance Instructions (WP 0019).
2. Inspect air cylinder piston cup and felt for wear or deterioration. Replace worn parts as necessary.
3. Inspect hydraulic cylinder bore for scratches or wear. Replace if necessary. Clean compensating port (smaller
hole in bottom of reservoir).
4. Check filler cap gasket for wear and replace if necessary.
END OF TASK
ASSEMBLY
00060
NOTE
Before assembling hydraulic cylinder parts, coat with hydraulic brake fluid (WP 0018).
1. Install spring (Figure 11, Item 2) and check valve and seat (Figure 11, Item 1) in valve retainer (Figure 11,
Item 3).
0060-8
