TM 5-3805-255-14
0084
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
END OF TASK
INSTALLATION
00084
1. Install gauge (Figure 2, Item 3) in front of gauge panel (Figure 2, Item 2).
2. Install bracket (Figure 2, Item 8) and two nuts (Figure 2, Items 1 and 5) on gauge (Figure 2, Item 3).
3. Install fitting (Figure 2, Item 9) in gauge (Figure 2, Item 3).
4. Install sending unit (Figure 2, Item 7) in fitting (Figure 2, Item 9).
5. Connect wire (Figure 2, Item 6) to sending unit (Figure 2, Item 7).
6. Connect line (Figure 2, Item 11) to gauge (Figure 2, Item 3). Tighten fitting (Figure 2, Item 10).
7. Install lamp (Figure 2, Item 4) in gauge (Figure 2, Item 3).
8. Install gauge face plate (Figure 3, Item 1) on instrument panel (Figure 3, Item 2).
Figure 3. Gauge Cluster.
0084
9. Turn battery disconnect switch to ON position (WP 0004).
10. Start engine and check operation of gauges (WP 0005).
END OF TASK
END OF WORK PACKAGE
0084-3/(4 blank)
