TM 5-3805-255-14
0085
CUTTING EDGE REMOVAL CONTINUED
00085
CAUTION
Wear suitable eye protection and gloves while operating grinder. Failure to follow these
instructions may result in injury to personnel.
6. Grind surface backing plate (Figure 4, Item 1) smooth along forward face (Figure 4, Item 2) and lower surface
(Figure 4, Item 3) where replacement tip contacts plate.
Figure 4. Backing Plate Preparation.
0085
Spade Nose Cutting Edge Removal
00085
NOTE
The spade nose cutting edge removal procedure is similar to the general purpose cutting
edge procedure, except the spade nose has two cutting edges instead of one. Refer to
Figure 5 and General Purpose Cutting Edge Removal in this work package to remove
both cutting edges.
Figure 5. Spade Nose Cutting Edges.
0085
END OF TASK
0085-4