TM 5-3805-255-14
0098
DISASSEMBLY CONTINUED
22. If necessary, drive idler shaft (Figure 12, Item 1) from body (Figure 12, Item 2).
.
Figure 12. Removing Idler Shaft.
0098
END OF TASK
CLEANING AND INSPECTION
00098
1. Wash all metal parts IAW General Maintenance Instructions (WP 0019).
2. Inspect idler shaft (Figure 13, Item 10) and oil pump body (Figure 13, Items 2 and 4) to ensure oil holes and
drilled passages are clean and open. Check drain holes in water pump body (Figure 13, Items 7 and 8).
Remove dirt or sludge from water pump seal drain hole. Inspect all pipes and hoses for damage and replace if
necessary.
3. Inspect all gears (Figure 13, Items 1, 3, 5, 6, and 9) for wear, scoring, and chipped teeth. Replace if necessary.
0098-12